OWON Oscilloscope Multimeter Frequency Meter Dual Digital Storage Handheld Oscilloscope 1GS/s

• Customization: Available
• After-sales Service: Yes
• Warranty: 1 Year
• Model NO.: HDS1022M-N
• Kind: Digital Oscilloscope
• Channel Number: 2
• Structure: Handheld
• Application: Voltage Measurement, Magnetic Field Measurement, Pressure Measurement, Displacement Measurement, Temperature Measurement, Impedance Measurement, Electric Power Measurement, Phase Measurements, Time Measurement, Frequency Measurement
• Sampling Mode: Real-time Sampling
• Bandwidth: ≤1GHz
• Sampling Rate: 1GSa/s
• Transport Package: Carton Package
• Origin: China
• HS Code: 9031499090
• Production Capacity: 50000piece/Month
• Package Size: 20.00cm * 30.00cm * 30.00cm
• Package Gross Weight: 3.000kg

Product Description

Digital Storage Oscilloscope 2 Channels 200Mhz Bandwidth 1GSa/s 7'' Handheld LCD Display Portable USB Oscilloscopes

 

 

Model	HDS1022M-N	HDS2062M-N	HDS3102M-N	HDS4202M-N
Bandwidth		20MHz	60MHz	100MHz	200MHz
Sample Rate (real time )		100MS/s	1GS/s
Horizontal Scale (s/div)		5ns/div~100s/div, step by 1~2.5~5	5ns/div~100s/div, step by 1~2~5		2ns/div~100s/div, step by 1~2~5
Display		3.7rdquo color TFT display (640 times 480 pixels)
Channel		dual
Record Length		6K points
Input Coupling		DC, AC, and GND
Vertical Sensitivity		5mV/div~5V/div (at input)
Vertical Resolution (A/D)		8 bits
Trigger Type		Edge, Video, and Alternate
Acquisition Mode		Sample, Peak Detect, and Average
Waveform Math		+, -, times, divide, invert, FFT
Communication Interface		USB
Power Supply		100V-240V AC, 50/60Hz
Li-ion Battery		7.4V, 6 hoursrsquo operation
Dimensions (W times H times D)		115 times 180 times 40 (mm)
Weight (without package)		645.00 g

 

 

 

Multimeter Specifications
Full Scale Reading	3(3/4) digit (max 4000-count)	diode	0V-1.5V
Input Impedance	10 MOmega	On / Off Test	< 50 (plusmn 30) beeping
Voltage	VDC : 400mV, 4V, 40V, 400V, 1000V : plusmn(1% plusmn 1 digit); max input : DC 1000V VAC : 4V, 40V, 400V : plusmn(1% plusmn 3 digits), 750V : plusmn(2% plusmn 3 digits); Frequency : 40Hz - 400Hz; max input : AC 750V (virtual value)
Current	DC : 40mA, 400mA : plusmn(1.5% plusmn 1 digit), 10A : plusmn(3% plusmn 3 digits) AC : 40mA : plusmn(1.5% plusmn 3 digits), 400mA : plusmn(2% plusmn 1 digit), 10A : plusmn(5% plusmn 3 digits)
Impedance	400Omega : plusmn(1% plusmn 3 digits), 40KappaOmega - 4MuOmega : plusmn(1% plusmn 1 digit), 40MOmega : plusmn(1.5% plusmn 3 digits)
Capacitance	51.2nF - 100uF : plusmn(3% plusmn 3 digits)

HDS1022M-N Handheld Digital Oscilloscope 3.7-Inch Semi-Reflective LCD Display Multifunction Oscilloscope Multimeter 100MS/s Dual Channe
Instructions:
1. Power adapter, used for AC power supply and battery charging.
2. Multimeter test pen.
3. Multimeter input jack, the first jack measures large current 2A-10A, the second jack measures small electricity
Current, third COM ground input, fourth measuring voltage, resistance, capacitance input.
4. Oscilloscope pole detection.
5. The oscilloscope channel input port is channel 1 (CH1) at the top near the screen, and channel 2 (CH2) at the bottom.
6. 1 kHz/5 V square wave test signal terminal
1. Battery indicator.
2. Automatic measurement window 1, where f represents the frequency, T represents the period, V represents the average value, Vp table
Vk indicates the root mean square value, Ma indicates the maximum value, Mi indicates the minimum value, and Vt indicates the peak value
The top value, Vb represents the bottom value, Va represents the amplitude, Os represents overshoot,Ps represents undershoot, RT table
The rise time is shown, FT is the fall time,PW is the positive pulse width,NW is the negative pulse width, and +D is the positive pulse width
Duty cycle: -d indicates negative duty cycle; PD indicates delay A->B; ND indicates delay A->B.
3. Automatic measurement window 2.
4. The pointer indicates the trigger horizontal position.
5. The time deviation between the trigger horizontal position and the center line of the screen is 0 at the center of the screen.
6. Trigger status indicates the following information:
Auto: The oscilloscope is in automatic mode and is collecting waveforms without triggering.
Trig'd: The oscilloscope has detected a trigger and is collecting triggered information.
Ready: All pre-trigger data is obtained and the oscilloscope is ready to be triggered.
Scan: The oscilloscope continuously collects and displays waveform data in scanning mode.
Stop: The oscilloscope stops collecting waveform data.
7. The red and blue Pointers indicate the position of the trigger level when alternately triggered, when triggered at the edge and video
When triggered, the trigger pointer is green.
8. Hidden MENU, press the menu key to display the menu.
9. Menu setting options. Different menus correspond to different setting options.
10. The reading indicates the value of the trigger level.
11. The reading indicates the trigger source.
12. The reading indicates the master time base setting.
13. The figure indicates the coupling mode of channel 2 (CH2). The figure ~ indicates AC, and the figure - indicates
Dc, figure "" indicates grounding.
14. Reading indicates channel 2 (CH2) vertical scale factor.
15. The figure indicates the coupling mode of channel 1 (CH1). The figure ~ indicates AC, and the figure - indicates
Dc, figure "" indicates grounding.
16. Reading indicates channel 1 (CH1) vertical scale factor.
Trigger mode: This oscilloscope provides three trigger modes: automatic, normal and single.
Automatic trigger mode: This trigger mode makes the oscilloscope even when no trigger conditions are detected
The waveform can be obtained, and when the oscilloscope does not trigger conditions within a certain waiting time, the oscilloscope proceeds
Forcible trigger. When invalid trigger is forced, oscilloscope cannot synchronize waveform.
Normal trigger mode: When the oscilloscope is in normal trigger mode, the waveform can be obtained only when it is triggered
When triggered, the oscilloscope will display the original waveform, but can not obtain the new waveform.
Single trigger mode: In the single trigger mode, the user presses the "RUN/STOP" button every time, the oscilloscope
A trigger is detected and a waveform is obtained.
Trigger suppression: Use trigger suppression control to stably trigger complex waveforms (such as pulse series). Release time is
Refers to the time that the oscilloscope waits for the trigger circuit to be re-enabled. During the release period, the oscilloscope will not trigger straight
Until the end of the release time.
When FFT is enabled, the following Settings are disabled:
1) Window setting;
2) Change the channel in CH1 Settings or CH2 Settings;
3) Display the XY format in the Settings;
4) Trigger set to 50% (that is, set the trigger level at the vertical midpoint of the trigger signal amplitude);
5) Automatic range;
6) Waveform recording;
7) Measure 1 and Measure 2
1. The oscilloscope table cannot be started.
It could be that the battery is completely drained. At this time, even if powered by the battery charger, the oscilloscope still does not
Can start. First you need to charge the battery: Use the power adapter to supply power to the oscilloscope, but do not turn on the oscilloscope.
Wait about 15 minutes before trying to turn on the oscilloscope. If it still doesn't start, please contact OWON,
Let us serve you.
2. The oscilloscope shuts down after a few seconds of startup.
Maybe the battery has run down. Look at the battery symbol at the top left of the screen. The symbol indicates that the battery has
Exhausted. Must be recharged.
3. Switch to a multimeter and display the measurement type ERR.
It may be that the measurement type is not selected, in this case, press any of the three keys A, V or R,
Measurement type The corresponding measurement type should be displayed. If ERR is still displayed, restart the oscilloscope.
4. In the oscilloscope state, the measured voltage amplitude value is 10 times larger or 10 times smaller than the actual value.
Check whether the channel attenuation coefficient is consistent with the actual probe error ratio used.
5. In the oscilloscope state, there is a waveform display, but it can not be stabilized.
? Checks that the source entry in the trigger mode menu matches the actual signal channel used.
? Check trigger type items: edge trigger mode should be used for general signals, and visual should be used for video signals
Frequency trigger mode. The waveform can be displayed stably only when the appropriate trigger mode is applied.
? Try to change the trigger coupling to high frequency rejection and low frequency rejection to filter out the high or low frequency of the interference trigger
Frequency noise (only applicable to models with this feature).
6. In the oscilloscope state, nothing is displayed when you press the RUN/STOP key
Check whether the trigger mode menu is triggered normally or once, and the trigger level exceeds the waveform
Scope. If so, center the trigger level or set the trigger mode to automatic. Also, press AUTO
The SET key automatically completes the above Settings.
7. In the oscilloscope state, set to the average sampling in the acquisition mode or the duration in the display setting
If the value is longer, the display speed slows down.
This is a normal phenomenon.

 

Sampling methods: 1. Common sampling 2. Peak detection 3. Average value
Sample rate:
HDS1022M-I 100 MSa/s
HDS1022M-N 500 MSa/s
HDS2062M-N
The maximum value of the HDS3102M-N is 1 GSa/s
HDS4202M-N Single channel 1 GSa/s
Input coupling: DC, AC, ground
Input impedance:
HDS1022M-I 1MΩ±2%, in parallel with 20pF±5pF
HDS1022M-N
HDS2062M-N
HDS3102M-N
HDS4202M-N
1MΩ±2%, in parallel with 15pF±5pF
Probe attenuation coefficient: 1X, 10X, 100X, 1000X
Maximum input voltage: 400V peak
Isolation voltage:
(HDS1022M-I only)
Oscilloscope channel and channel isolation voltage 1000 Vpp (AC+DC)
Oscilloscope channel and interface isolation voltage 1000 Vpp (AC+DC)
Oscilloscope channel and multimeter isolation voltage 1000 Vpp (AC+DC)
Multimeter isolation voltage 1000 Vpp (AC+DC)
Channel delay time (typical) : 150p
Sample rate range:
HDS1022M-I 0.25Sa/s to 100MSa/s
HDS1022M-N 0.25Sa/s to 500MSa/s
HDS2062M-N
HDS3102M-N
HDS4202M-N
0.25Sa/s to 1GSa/s
Waveform interpolation: (sinx) /x
Record length: 6k sampling points per channel
Sweep speed range (S/div) :
HDS1022M-I 5 ns/div ~ 100 s/div. The value is in base 1 to 2.5 to 5
Mode step
HDS1022M-N
HDS2062M-N
HDS3102M-N
5 ns/div to 100 s/div, in digits of 1 to 2 to 5
Step by step
HDS4202M-N 2 ns/div ~ 100 s/div. The value is in digits 1 to 2 to 5
Step by step
Sampling rate and delay time:
Accuracy ±100 ppm (any time interval ≥1 ms)
Time interval (△T) measurement
Measurement accuracy (full bandwidth) :
Single time: ±(1 sampling interval +100 ppm× reading + 0.6ns)
>16 averages: ±(1 sampling interval +100 ppm× reading + 0.4ns)
Analog to Digital converter (A/D) : 8-bit resolution, simultaneous sampling of two channels
Displacement range:
HDS1022M-I
HDS1022M-N
HDS2062M-N
HDS3102M-N
±2 V(5 mV/div ~ 200 mV/div),
±50 V(500 mV/div ~5 V /div)
HDS4202M-N
±1 V(5 mV/div ~ 100 mV/div)
±10 V(200 mV/div ~1 V /div)
±50 V(2V/div ~5 V /div)
Analog bandwidth:
HDS1022M-I
HDS1022M-N 20 MHz
HDS2062M-N 60 MHz
HDS3102M-N 100 MHz
HDS4202M-N 200 MHz
Single bandwidth: Full bandwidth
Low frequency response (AC coupling, -3dB) : ≥10 Hz (on BNC)
Rise time (typical on BNC) :
HDS1022M-I
HDS1022M-N ≤17.5 ns
HDS2062M-N ≤ 5.8 ns
HDS3102M-N ≤ 3.5 ns
HDS4202M-N ≤ 1.7 ns
Dc gain accuracy: ±3%
Dc measurement accuracy
(Average sampling method) :
After averaging the captured ≥16 waveforms, the wave pattern takes the first two points
The voltage difference between (△V: ±(5% reading + 0.05 grid).
Trigger level range: ±6 bars from the center of the screen
Trigger level accuracy (typically) accurate
Degree applies to rise and fall time ≥
20ns signal:
±0.3 cells
Trigger displacement: 655 bars are triggered before and 4 bars are triggered after
Release range: 100 ns ~ 10 s
Signal system and line/field frequency
(Video trigger type) :
NTSC, PAL and SECAM for any field or line frequency are supported
Broadcast system
Trigger frequency counter
Reading resolution: 6 bits
Frequency range: 2 Hz to full bandwidth
Signal source:
When the trigger mode is "edge", it is a single channel frequency meter
When the trigger mode is "alternating", it is a dual-channel frequency meter
Frequency counter does not work when trigger mode is "video"
1X position 10X position
Bandwidth DC to 6 MHz DC to full bandwidth
Attenuation ratio 1:1 10:1
Compensation range 15 pf ~ 35 pf
Input resistance 1 MΩ ± 2% 10 MΩ ± 2%
Input capacitance 85 pf to 115 pf 14.5 pf to 17.5 pf
Input voltage < 200 V DC + Peak AC < 600 V DC + Peak AC
Mechanical size: 18 cm×11.5 cm×4 cm
Weight: 685 grams
Power consumption: HDS1022M-I < 6 W
HDS1022M-N
HDS2062M-N
HDS3102M-N
< 7 W
HDS4202M-N < 8 W
Display type: 3.7-inch color LCD
Display resolution: 640 horizontal x 480 vertical pixels
Display color: 65536 colors
Power supply voltage: 100-240 V AC 50/60 Hz
Output voltage: 10 VDC
Output current: HDS1022M-I 1500 mA
HDS1022M-N
HDS2062M-N
HDS3102M-N
HDS4202M-N
3000 mA

 

Product  list:

1.OWON oscilloscope meter and battery
2 Power Adapter
3 Two oscilloscope probe (gray)
4 Two multimeter test pens (one red, one black)
5 One USB flash drive adapter cable
6 One capacitance measurement module
7 An oscilloscope probe adjustment tool
8 One RS-232 data cable or USB data cable
9 A quick guide
10 One user CD (including oscillograph and computer communication software)
11 A portable aluminum suitcase
12 One to carry a soft bag
13 1 kHz 5 V square wave test signal output terminal

 

FAQ

1. Are you a manufacturer or a trader?
Yes, we are both.
 
2. What products do you have?
We are focus on instruments and meters. Such as Mechanical /  Optical /Power/ SafetyEnvironmental testing equipments and
some hardware tools amd eletronic components.
More infomation about business, please contact us we can send you catalog for reference.

3. Can i get a sample first?
Yes, we are pleased to send you sample to test the quality and market.

4. Can you do OEM for us?
Yes, OEM are welcome for us. Customers' brand, logo, label can be customized for the produets andcarton package, but based on a certain quantity.

5. What are your strengths?
We have a complete range of products covering low, medium and high-end markets in good price in Instruments field.
Fast Delivery, factory high quality and professional engineers to solve your problems.