General Technical Specifications |
Display Type | 8in Color LCD Display |
Display Resolution | 800 Horizontal x 600 Vertical Pixels |
Display Color | 65536 Colors, TFT |
Characteristic | Parameter |
Bandwidth | 100MHZ |
Vertical Resolution (A/D) | 8-Bit |
Channel | 2 |
Waveform Refreshing Rate | 45,000wfms/S | |
Sampling | Sampling Method | Normal Sampling, Peak Detection, Average |
Real-Time Sampling | Two Channels | 500MSa/S |
Single Channel | 1GSa/S |
Enter | Input Coupling | DC, AC, Ground |
Input Resistance | 1MΩ±2%, in parallel with 15pF±5pF |
Probe Attenuation Coefficient | 0.001X-1000X, step by 1-2-5 system |
Maximum Input Voltage | 400V (DC+AC Peak Value) |
Horizontal Scanning Range (S/Div) | 2ns/Div-1000s/Div, Step By 1-2-5 System |
Vertical Sensitivity (Volt/Div) Range | 1mV/Div-10V/Div |
Analog Bandwidth | 120MHZ |
DC Gain Accuracy | 1mV, ±4%, ≥2mV, ±3% |
Maximum Storage Depth | Turn On Single Channel, Up To 40M Points |
Time Base Accuracy | Maximum ±10ppm (Ambient Temperature Is +25ºC) |
Trigger Type | Edge, Video, Pulse Width, Slope, Runt, Over Amplitude (Windows Trigger), Timeout, Nth Edge, Logic, I2C, SPI, RS232, CAN (Optional) |
Decoding Type | I2C, SPI, RS232, CAN |
Trigger Method | Automatic, Normal, Single |
Video Trigger | Signal System | Support any field frequency or line frequency NTSC, PAL and SECAM broadcasting system |
Line Frequency Range | The range of the number of rows is 1 to 525 (NTSC) and 1 to 625 (PAL/SECAM) |
Measuring | Cursor Measurement | Voltage Difference Between Cursors (△V), Time Difference Between Cursors (△T), Time Difference Between Cursors & Voltage Difference (△T&△V), Automatic Cursor | |
Automatic Measurement | Period, Frequency, Average, Peak-To-Peak, Rms, Maximum, Maximum, Small Value, Top Value, Bottom Value, Amplitude, Overshoot, Preshoot, Rise Time, Fall Time, Positive Pulse Width, Negative Pulse Width, Positive Duty Cycle, Negative Duty Cycle, Delay, Delay A→B, Delay A→B, Period Root Mean Square, Cursor Root Mean Square, Screen, Screen Pulse Width Ratio, FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF, Phase A→B, Phase A→B, The Number of Positive Pulses, The Number of Negative Pulses, Number of Rising Edges, Number of Falling Edges, Area, Cycle Area |
Computation | Addition, Subtraction, Multiplication, Division, FFT, FFTrms, Differentiation, Integration, Square Root, Function Calculation, User-Defined Function, Digital Filtering (Low Pass, High Pass, Band Pass, Band Stop) |
Decoding Type (Optional) | UART, I 2 C, SPI, CAN |
Store Waveform | 100 groups of waveforms |
Lissajous Graphics | Bandwidth | Full Bandwidth |
Phase Difference | ±3 Degrees |
Communication | Communication Interface | USB Host, USB Device; Trig Out (Pass/Fail); LAN Interface |
Printer Compatible | PictBridge |
Frequency Meter | Stand By |
Output of Probe Compensator: |
Output Voltage (Typical) | About 5V, when peak-to-peak ≥1 MΩ load |
Frequency (Typical) | 1KHz square waves |
Power Supply | 100V-240 VACRMS, 50/60 Hz, CAT |
Power Consumption | <15 W |
Multimeter |
Digital Display | 4 Digits (Maximum display is 19999) |
Diode | 0V-2V |
Input Resistance | 10 MΩ |
Continuity Test | <50Ω buzzer |
Capacitance | 2nF - 20mF: ±(4.0%+10digit) |
Voltage | DCV: 20mV, 200mV: ±(0.5%+10digit); 2V, 20V, 200V: ±(0.3%+5digit); 1000V: ±(0.5%+5digit) Maximum Input DC Voltage 1000V ACV: 20mV, 200mV, 2V, 20V, 200V: ±(0.8%+10digit) 750V: ±(1%+10digit) Frequency: 40Hz-1000Hz, Maximum Input AC Voltage 750V (Effective Value) |
Current | DCA: 10A: ±(2%+10digit) ACA: 10A: ±(2.5%+10digit) |
Impedance | 200Ω: ±(0.8%+10digit) 2KΩ ~ 2MΩ: ±(0.5%+3digit) 20MΩ: ±(0.8%+5digit) 100MΩ: ±(5.0%+10digit) |
Battery | 7.4V, 8000mAh After battery is full charged, it can supply power for about 5 hours (for different models, it will be different). |
Temperature | Working Temperature: 0ºC-40ºC |
Storage Temperature: -20ºC - +60ºC |
Relative Humidity | ≤90% |
Height | Operating 3,000 Meters Non-Operating 15,000 Meters |
Cooling Method | Fan Cooling |